The 700 UHA is the most radical weapon for breaking records in Downwind. It represents the ultimate kite for downwinding or for those who want to go fast and go up very hard in wingfoil, turn quickly, go up quickly and descend at full speed on limitless swell trains. What will be your limit and your ability to push back what was not yet acceptable to you? This UHA 700 will allow you to discover it. Nevertheless, this range remains very accessible. Soaring like a bird, skimming the crest of the waves at full speed as you effortlessly descend the swell trains, becomes a reality with our UHA (Ultra High Aspect Ratio) range. This range, with a large wingspan, allows you to foil almost without wind and without swell, using all the energy needed in the swell to foil. If you are looking for a kite to go fast in downwind or to downwind in wing, UHA kites have been created for you and they will surprise you with their ease and performance. This range now consists of 5 wing sizes: 700 UHA (700 cm2), 800 UHA (800 cm²), 930 UHA (930 cm²), 1100 UHA (1100 cm²) and 1260 UHA (1260 cm²). It is perfectly suited to the LW and DW board ranges as well as the Superfly. Building on the success of the HA Speed range, we decided to apply the same profile in order to bring the same smoothness to take-off, but with impressive speed performance. It’s impossible to be disappointed with this UHA range: speed, glide and handling are the three words that best characterize it

L’article 700 HAU est apparu en premier sur SROKA Company.

Discover the S Foil Alu in UHA

Soaring like a bird, skimming the crest of the waves at full speed as you effortlessly descend the swell trains, becomes a reality with our UHA (Ultra High Aspect Ratio) range. This range, with a large wingspan, allows you to foil almost without wind and swell. Use all the energy available in the little swell to maintain the foil and fly on swell trains.

Our aluminum S Foil is designed to provide exceptional strength and durability while remaining lightweight and maneuverable. The aluminum mast provides increased rigidity and a strong connection, ensuring optimal stability even in difficult conditions. If you are looking for a kite to go fast in downwind or to downwind in wing, UHA kites have been created for you and they will surprise you with their ease and performance.

UHA Wing Range

This range consists of 5 sizes of kites:

• 700 HAU (700 cm²)
• 800 UHA (800 cm²)
• 930 UHA (930 cm²)
• 1100 UHA (1100 cm²)
• 1260 UHA (1260 cm²)

Key features

• Performance : Using the same profile technology as our HA Speed range, our UHA wings offer exceptional smoothness on take-off and impressive speed performance.
• Versatility : Perfectly suited to the LW and DW board ranges as well as the Superfly.
• Ease of Use : Designed for quick handling and increased maneuverability, these kites are ideal for all levels of riders.
• Durability : The aluminum pole ensures long-term durability and superior wear resistance.

Speed, Glide and Maneuverability

It’s impossible to be disappointed with this UHA range. Speed, glide and handling are the three words that best characterize it. With our aluminum S Foil and UHA wings, every session becomes an unforgettable experience, whether you’re an ambitious beginner or an expert looking for new sensations.

Adjustment wedge supplied with this range.

L’article S-foil UHA 700 – 1260 est apparu en premier sur SROKA Company.

SROKA Impact PRO, the top-of-the-range impact jacket to protect yourself from shocks in wakefoil, wingfoil and towed surf foil.

Designed with premium materials, this vest offers optimal protection and comfort. We’ve designed it so that you forget about it while sailing. To do this, we have used soft and absorbent materials, while arranging the foam panels in such a way that they do not hinder the body’s movements.

L’article Pro Impact Vest for Wingfoil & Wakeboard est apparu en premier sur SROKA Company.

L’article Elite Carbon Foil 14mm | 85cm est apparu en premier sur SROKA Company.

L’article Solo Carbon Foil 16mm | 85cm est apparu en premier sur SROKA Company.

L’article Elite Carbon Mast 14 mm | 85 cm + fuselage est apparu en premier sur SROKA Company.

The new HA2000 is the ultimate wing for pumping.

You’ll be able to pump endlessly with minimal effort. The HA2000 will allow you to break records for duration or learn the discipline with ease.

After dozens of prototypes, we found the wing with the perfect ratio aspect ratio and the most optimal glide/lift compromise for pumping. We use a Lift profile that carries and allows you to stay in the air at low speeds.

The HA2000 is interchangeable with all other front wings and fuselages in the SROKA S-Foil range.

This fin in 2000 works with all stabilizers and fuselages. Adjustment shims are included with the package

Ailette only available here.

L’article S-Foil High Aspect 2000 est apparu en premier sur SROKA Company.

The new HA2000 is the ultimate wing for pumping. You’ll be able to pump endlessly with minimal effort. The HA2000 will allow you to break records for duration or learn the discipline with ease.

After dozens of prototypes, we found the wing with the perfect ratio aspect ratio and the most optimal glide/lift compromise for pumping. We use a Lift profile that carries and allows you to stay in the air at low speeds.

The HA2000 is interchangeable with all other front wings and fuselages in the SROKA S-Foil range.

This fin in 2000 works with all stabilizers and fuselages.

Full foil available here.

L’article S-Foil High Aspect 2000 Front Wing est apparu en premier sur SROKA Company.

L’article S-Foil High Aspect 1190 Wave est apparu en premier sur SROKA Company.

S-Foil HA 1350 Lift

The High Aspect 1350 Lift foil front wing will make you glide endlessly downwind and reconnect small swell trains with disconcerting ease in surf foil, wake foil or wingfoil in all conditions. This wing will make you rediscover your usual spots. Choppy bodies of water that were previously unusable will be your new playground.

Very easy to take off, the HA 1350 L no longer descends once in flight. A simple pumping stroke, an inconsistent swell train or a little breeze is enough to prolong the pleasure of gliding indefinitely. Everything has been done to offer you a magical, infinite glide, with a minimum of effort.

The HA 1350 Lift is also ideal for navigating lakes, where it passes sluggishness super well while flying for a long time. You will be able to take advantage of the slightest breeze and the slightest ripple to fly away and glide effortlessly.

The HA 1350 front wing is compatible with all S-Foil fuselages and stabilizers. The foil comes with screws and a custom-made transport/protection case.

The front wing alone is available here for €499.90

L’article S-Foil High Aspect 1350 Lift est apparu en premier sur SROKA Company.

How to choose your foil stabilizer?

Stabilizer 300

The standard stabilizer for the S-Foil Sroka. It allows you to practice wingfoil, surf foil, SUP foil and wake foil. It’s the ideal stabilizer to do everything without worrying about it.

Very soft at take-off, it is totally forgotten under the feet once in flight with its fine glide and healthy supports.

With its intermediate ratio aspect, it offers an excellent compromise between manoeuvrability and pumping. Without getting stuck on a rail while surfing, it forgives mistakes in turns, gives power under the back foot to pumping and maneuvers smoothly. In a straight line, its super healthy handling allows you to press hard to gain speed.

Ideal with:

– The entire Classic range

– HA 1190 L and 1390 L for surfing, downwind and pumping

Stabilizer 240

The 240 Stabilizer unbridles your foil. Its profile is sharper and thinner than that of the 300 and increases your glide tenfold, to the detriment of lift at low revs.

Its mid-ratio appearance, coupled with its profile tailored for speed, gives it unparalleled maneuverability that will delight all experienced surfers looking for aggressive turns. With the ultra-short fuselage of 56cm, it becomes possible to chain manoeuvres in a handkerchief.

It is also the ideal stabilizer for those who want to gain maneuverability and glide in wingfoil, SUP foil, downwind while keeping versatility. It allows you to unleash the entire Classic range.

Ideal with:

– The entire High Aspect range

– The 1250 Classic in surfing and wingfoil

Stabilizer 180

The 180 stabilizer makes no concessions. The speed and glide are crazy, nothing holds the foil back. Whether it’s wingfoil, surf foil in the big game and even kite foil and windfoil, its profile offers a very high VMax and superb accelerations, where even the 240 would reach saturation. 

Its very high aspect ratio allows it to retain its impressive pumping capabilities despite its small surface area. With the same wingspan as the 240 stabilizer, it remains very manoeuvrable and lively in even the tightest curves. It is intended for the most determined of riders who want maximum speed and performance for their foil and reveals all its character at high speed. 

Ideal with: 

– HA 1190 S, HA 1190 L, HA 950 S 

Construction & Dimensions

All of our stabilizers are constructed of the finest pre-preg 3K carbon. The carbon is coated with a protective varnish that durably increases the life of your fins and maximizes glide. The 300 and 240 stabilizers have an ultra-dense Airex foam core, to save maximum weight while maintaining perfect rigidity. The machining provides impeccable interlocks between the fuselage and the carbon part. The result is an impeccable hydrodynamic profile, excellent rigidity with M8 screws and high-end finishes.

Les différences entre une pagaie de paddle en carbone vs aluminium

Les différences entre une pagaie de paddle en carbone vs aluminium

En général, nous pouvons établir un parallèle entre le paddle et la …

Les meilleurs spots de stand up paddle en France

Les meilleurs spots de stand up paddle en France

Depuis maintenant plus de 10 ans, le stand up paddle gonflable ne cesse …

Sélection de paddles gonflables : notre comparatif 2024

Sélection de paddles gonflables : notre comparatif 2024

Vous êtes à la recherche d’un paddle gonflable pour l’été pour naviguer …

Quel est le meilleur paddle ?

Quel est le meilleur paddle ?

Le paddle, nul besoin de le présenter, c’est un sport nautique qui …

S-Foil Sroka Stabilizers

Our range of S-Foil Sroka stabilizers allows you to rediscover your foil. From expert to beginner, wingfoiler to surfer, all foil sports and levels have been taken into account in the development of this range. Our stabilizers offer magical gliding sensations and allow you to reveal the full potential of your S-Foil. Perfectly compatible with all fuselages, they are interchangeable to allow you to fully customize your S-Foil. Find out more about the 300, HA 240 and HA 180 stabilizers.

L’article S-Foil Sroka Stabilizers est apparu en premier sur SROKA Company.

Sroka Inflatable Wing Foil Pack – Air Inflatable Board 5’3, 6′ or 6’4 – Wing in 5m – S-Foil 1750.

Delivery 1 to 3 working days in metropolitan France if the product is in stock.

Whether you are a beginner or a wingfoil pro, you are looking for high-performance, durable and scalable equipment. For those who need space and travel without worrying about it, we have combined all the qualities of a top-of-the-range wingfoil pack with your desires for freedom. We have made every effort to offer you a board capable of offering you maximum sensations. Thanks to its carbon plate covered with a protective layer of high-quality PVC, the Sroka Air is unrivalled in its rigidity.

We offer several sizes of boards adapted to your size and level in these packs. They have a standard US dual rail housing.

If you have any questions about which Wing Foil Pack to choose, take the time to read our article “ How to choose your wingfoil pack ” to help you make the right choice.

Discover here the news of the inflatable pack with the new V2 boards and the new V4 wing, available for 2050€

L’article Sroka Air V1 Inflatable Wing Foil Pack est apparu en premier sur SROKA Company.

Performance foil set for HA 950 S and Stab 240 front wing

The most capable foil wing combo in the range. The High Aspect 950 Speed front wing and its High Aspect 240 stabilizer work in perfect harmony to shatter your speed records, with incredible glide. This discounted kite set is designed for experienced wing foil and surf foil practitioners. We have worked on the profiles with extreme care to offer you a take-off from 15 knots of wind for a size of 80 Kg, a very healthy behavior for absolute control at high speed, all with unparalleled performance.

In surf foil, this set of foil wings offers amazing pumping thanks to its great aspect ratio. The very healthy handling and the unprecedented work on the profile allow an early start in flight while unbridling the speed of the foil to surf fast and powerful waves. This combo accentuates the maneuverability of your foil.

In wing foil, you benefit from an incredible top speed. However, take-off is easy in average wind conditions. The resulting gliding sensation is unique.

Ideal for wing foil (advanced), kite foil, wind foil, surf foil (advanced level, big waves, powerful swell, towed).

Recommended with:

• 62cm fuselage (manoeuvrable configuration) or 68cm standard fuselage (speed configuration)
• Mast 70/80cm in surf foil – mast 80/90cm in wing foil
• Sky Rider 4’8 – Sky Rider 5’5 – Fast Flyer 4’6

L’article Wing set HA 950 Speed + stab 240 est apparu en premier sur SROKA Company.

The S-Foil High Aspect 950

Push your limits with the Speed range! This new 950 HA Speed foil with its small 240 stabilizer will give you incredible sensations of speed and glide in addition to an ultra-efficient pumping. From intermediate to pro, this combo will be the best way to have fun in medium to strong wind and wave conditions.

Our High Aspect front fenders feature profiles with enormous speed potential while being accessible. In wing foil as well as surf foil, they reward the rider with exhilarating acceleration and top speeds with maximum precision in the turns.

For those who want High Aspect front fenders that are more forgiving and accessible but with interesting performance: Lift range.

All front fenders are interchangeable on your S-Foil.

Ideal for wing foil, kite foil, wind foil and surf foil.

The S-Foil with the HA 950 cm² Speed fin is sold with its new adapted stabilizer: 240 cm²

HA950 Speed front fender here.

L’article S-Foil High Aspect 950 Speed est apparu en premier sur SROKA Company.

Effectively protect your wingfoil board

Our boardbags have been developed to offer the best protection to your foil boards during transport or handling of your equipment on the spot. Thanks to their thickness and the quality of the materials, your board is always safe. In addition, these reflective materials on the entire surface of the cover and the ventilation valve prevent your equipment from overheating.

A solid boardbag

It wouldn’t be possible to effectively protect your foil board without your boardbag being super strong itself. Your board cover is constructed with premium reflective and abrasion-resistant materials. The cover is reinforced with additional seams and reinforcement straps so that the weight of your foil board is always correctly distributed. Finally, we have left no parts susceptible to corroding with salt, while offering quality plastics for excellent material longevity.

A practical board cover

Your boardbag is an indispensable companion, so it should be as practical as possible. To do this, we have made sure to use materials that are easy to rinse and wash. The cover is equipped with gussets that make storage easier and allow all foil boards to fit. We have also placed an opening to leave your foil mounted on your board in the cover. Finally, useful storage for your accessories and screws has been placed in the bag, so that you can take all your equipment safely.

Size guide:

L: 194cm x 73.7cm x11.5cm

M: 173cm x 73.7cm x 11.5cm

S: 157.4cm x 68cm x 10.3cm

Board models compatible with size S : Sky Rider 4’8 – Fast Flyer 4’6

Board models compatible with size M : Sky Rider 5’5 – Sky Rider 5’2

Board models compatible with size L : Sky Rider 6’3 – Sky Rider 5’8

Find us on social media

Facebook


Twitter


Youtube


Instagram

Check out our latest videos on our Youtube channel Sroka Watersports

The Blog

Our tutorials and articles on Wingfoil

Our team has designed the ideal foil board covers, perfectly suited to all foiling disciplines. Our boardbags have been developed to be the ultimate and indispensable protection for your favorite boards. These covers are the must-have accessories for all your sessions. Designed by enthusiasts who practice on a daily basis, they have been designed to bring you maximum comfort on the spot, with reinforced and comfortable handles, the possibility of leaving the foil mounted in the board or pockets for your accessories, such as the screws of your foil, or reflective and super resistant materials.

Our Sroka foil board covers are available in three sizes: S, M and L. Check out our size guide below to find the wing board boardbag that best suits your needs.

L’article Foil board carrying case – Boardbag est apparu en premier sur SROKA Company.

Retail screws for the Foil Sroka 2021 range

All the hardware to equip your 2021 S-Foil. Here are the different lots available:

• 4 M8x20 screws and their nipples for the S-Foil 2021/Air Inflatable Board attachment
• 4 M8x25 screws and their nipples for the S-Foil 2021 frame/Sky Rider and Fast Flyer hard board attachment
• 4 M8x30 screws to attach the fuselage and plate to the mast
• 3 M8x25 screws for attaching the Classic front wings to the fuselage
• 3 x M8x16 screws for attaching the High Aspect front wings to the fuselage
• 2 M8x25 screws to attach the stabilizers to the fuselage (this length allows for the installation of adjustment shims)
• M8 Torx Wrench

L’article Retail Hardware est apparu en premier sur SROKA Company.

Complete screws for the S-Foil Sroka 2021

This complete screw kit includes:

• A Torx wrench with an M8 diameter
• 4 M8x30 screws for the mast of the S-Foil 2021
• Three M8 screws for the front fender (please choose your fender type from the product options)
• 4 M8 screws and their nipples for the turntable/board attachment (please choose your board model from the product options)
• A tube of Gel
• Optionally, a set of adjustment shims to adjust the angle of incidence of your stabilizer (three shims of 0.5° – 1° and 2°)

We recommend disassembling and rinsing the foil with fresh water after each session, as well as avoiding getting sand on the Tef Gel and in the threads. If you don’t disassemble your foil, its elements can remain welded together by corrosion.

These screws are compatible with the 2021 S-Foil and not the 2020 S-Foil (which uses M6 screws). Find the screws for your S-Foil 2021 on this page.

L’article Complete screws for S-Foil and Sroka boards est apparu en premier sur SROKA Company.

Fuselage adapter between 2021 front wings and 2020 S-Foil

This year, our connection system between the front wing and the fuselage has changed for our new S-Foil, for a gain in simplicity and rigidity. However, there was no question of leaving behind those who own a 2020 S-Foil. For those who own a 2020 S-Foil, we offer this fuselage at cost price. It will allow you to keep your 2020 stabilizer, your 2020 mast and your 2020 plate and to take advantage of all the new foil front wings of the 2021 range and those to come, including the High Aspect and the Classics.

Regarding the screws: 3 M8x25 screws for the Classics at the front (and 3x M8x20 for the High Apsect) and 2 M6x20 screws for your 2020 stabilizer at the back.

PLEASE NOTE: this fuselage is not compatible with the mast of the S-Foil 2021 but only with the mast of the S-Foil 2020. If you’re looking for a fuselage for the 2021 S-Foil, check out the product page of our range of foil fuselages .

L’article 2020 S-Foil adapter fuselage and 2021 front wings est apparu en premier sur SROKA Company.

PLATINUM FOR S-FOIL 2021

The Plate for S-Foil 2021 is compatible with all masts of the same year. Its T6061 T6 aluminum construction has been revised to offer you an even more extraordinary flying sensation. An essential part of the S-Foil, it guarantees its rigidity thanks to a deeper mast and fuselage footprint than before. Its new elegant design, all in curves, also allows you to efficiently distribute the forces of the foil on the housing of your board. In addition to a performance gain, this distribution increases the lifespan of your equipment.

It is attached to the mast by two M8 screws. Its US double rail connection makes it compatible with the vast majority of foil boards on the market, in addition to offering you solidity and ease of use.

L’article S-Foil Plate est apparu en premier sur SROKA Company.

Mast for S-Foil 2021

The mast for S-Foil 2021 is stiffer and lighter than its predecessor. Its shortened rope will make you more maneuverable for more intense jibes and turns than ever. Its T6061 T6 aluminum construction guarantees unfailing strength and rigidity. It adapts to all foil sports. Thanks to its three available sizes (70, 80 and 90cm), it allows you to adapt your sailing style according to your desires and needs. All our 2021 S-Foil parts are compatible and interchangeable, so you can build the foil of your dreams yourself or adapt to your body of water.

Find here the High Aspect (speed and pumping) and Classic (freeride and carving) fins, the fuselage and the frame for the S-Foil 2021. Please note that this mast is not compatible with the 2020 S-Foil. Find out how to choose the right mast for your Foil Sroka below!

L’article S-Foil Mast est apparu en premier sur SROKA Company.

Fuselage for S-Foil

The Fuselage for S-Foil 2021+ is now available in several lengths. The goal is to allow you to have a fully modular and scalable foil, capable of adapting to your needs. By default, all our S-Foils are sold in a standard configuration. For those who want more maneuverability, the Short and Ultra Short fuselage will allow you to make sharp turns in the waves and radical maneuvers. They are also less stable longitudinally and require a higher pumping frequency. Short fuselages are therefore intended for two who have an intermediate or advanced technical level. The standard, short and ultra-short fuselages allow you to practice all foil disciplines apart from Windfoil, which has its dedicated 93cm fuselage (coming on this page).

Our fuselages are experiencing a significant increase in rigidity this year. Their connection makes it easier to assemble and disassemble your S-Foil, in addition to making all 2021+ fins compatible and interchangeable on the same foil. Their composition is made of T6061 T6 aluminum, used for the aeronautical industry, giving them rigidity and durability.

L’article Fuselage S-Foil est apparu en premier sur SROKA Company.

Classic S-Foil Front Fins

Our Classic fins complete the High Aspect range. Whether you are looking for an introduction to Wing Foil or to surpass yourself and move up a gear in Surf Foil, there is a Sroka fin for you. For beginners or riders looking for lift and stability, the 1750 (XL) and 2000 (XXL) fins will be perfect. The 1500 (L) will seduce with its versatility by opening up a variety of practices, from SUP Foil to Wake Foil and Wingfoil.

All our fins are scalable products. For example, while a beginner will be satisfied with the lift and stability of the 1750, an experienced rider looking for maximum lift in light wind will be able to reveal its full potential. Our goal is for every element of your quiver to be durable, not only because of its quality but also because of its performance. All our profiles have been carefully designed, designed and tested to make you feel the maximum feeling of freedom that the foil provides.

Please note that these front wings are not compatible with the 2020 model S-Foil, except with the 2020 mast/front wing adapter fuselage.

Their detailed features are on this link. To choose the right kite for you, keep reading.

L’article Classic S-Foil Front Fins est apparu en premier sur SROKA Company.

Sroka Inflatable Wing Foil Pack – Air Inflatable Board 5’3, 6′ or 6’4 – Wing in 5m – S-Foil 1750.

Delivery 1 to 3 working days in metropolitan France if the product is in stock.

Whether you are a beginner or a wingfoil pro, you are looking for high-performance, durable and scalable equipment. For those who need space and travel without worrying about it, we have combined all the qualities of a top-of-the-range wingfoil pack with your desires for freedom. We have made every effort to offer you a board capable of offering you maximum sensations. Thanks to its carbon plate covered with a protective layer of high-quality PVC, the Sroka Air is unrivalled in its rigidity.

We offer several sizes of boards adapted to your size and level in these packs. They have a standard US dual rail housing.

If you have any questions about which Wing Foil Pack to choose, take the time to read our article “ How to choose your wingfoil pack ” to help you make the right choice.

The inflatable wingfoil pack is available with the v1 inflatable board and the v4 sail at 1499€

https://srokacompany.com/caracteristiques-techniques-des-ailes-de-foil-sroka/

L’article Sroka Air V2 Inflatable Wing Foil Pack est apparu en premier sur SROKA Company.

Discover the S-Foil High Aspect

With its High Aspect wing (1190 L or 1190 S), the S-Foil offers effortless pumping and magical gliding sensations. This range complements the S-Foil Classic range, offering complementary front wings to push the limits of your riding.

• The HA 1190 S (Speed) wing is made for wingfoil. It offers a superb feeling of speed in addition to a super efficient pumipng. This wing is one of the fastest in our range, along with the 1250 Classic and the 950 Speed. Thanks to its profile, aspect ratio and wingspan, it offers excellent straight-line stability, as well as smooth, easy and fully controlled speed peaks. It will also work wonders in Kite Foil and Wind Foil.
• The H 1190 L (Lift) kite is designed for lovers of Surf Foil, SUP foil, Wake Foil. The HA 1190 L (Lift) is clearly Surf Foil oriented with a more buoyant but slower profile than the HA 1190 S. Its 15-20% more lift gives you more lift and more power. This will allow you to optimize your pumping to reconnect the waves without stopping.

Discover all the new features of the S-Foil and the details of the High Aspect range. We also help you choose your front fender according to your practice in this product sheet. It is supplied with its carrying case and complete screws.

Also check out the 950HA Speed for those who love pure speed and the 1350 HA Lift for those who want to glide endlessly.

https://srokacompany.com/caracteristiques-techniques-des-ailes-de-foil-sroka/

L’article S-Foil High Aspect 1190 est apparu en premier sur SROKA Company.

K950 Freeride Wave Kite Foil & Stabilizer Pack

For the launch of our new kite fin dedicated to the K950 kitefoil, we offer a pack of kite foil fins with stabilizer. The K950 XXL takes off very early and very smoothly. Accompanied by the stabilizer, it has a high stability. This pack brings maximum control and manoeuvrability in the waves, but also in all jibes, tacks and curves. Even if it is perfect for light and carving, its top speed is not to be outdone.

From beginner to expert, this pack is suitable for all sizes and levels. Freeride oriented, it is easy to access while remaining scalable. These fins are compatible with all 2020 K FOIL SROKA masts and fuselages that you can see on the website. The technical details of our wings can be found here.

L’article Kite Foil Fin Pack – K950 XXL + Stabilizer est apparu en premier sur SROKA Company.

Choose Your High Aspect Wing

To enrich our range of foil front wings, we are adding the High Aspect range to the
classic S Foil
. Where the mid-aspect ratio of the Classic offers carving and versatility, here we have designed front fins with uncompromising glide and pumping. Each High Aspect has a unique profile, which we designed by collecting feedback from our customers to build the ultimate gliding weapon:

• The
  HA 1190 S (speed)
  is perfect for
  wing foiling
  . It will also be excellent for those who want to surf powerful swell trains, but also in other foil disciplines such as Wind Foil and Kite Foil. It provides sensations of speed, glide and absolute control that will change your vision of the foil. It also delivers a superb pumping. This profile is faster, but less buoyant than the Lift. Thanks to its size and profile, your experience will never be punishing, and you will remain in control no matter the situation.
• 
  The HA 1190 L (Lift)
  is here to satisfy your surfing desires. It will fully reveal itself in
  Surf Foil
  , SUP foil, and
  Wake Foil.
  This wing benefits from a profile with almost 20% more lift compared to the Speed. It generates a pumping and glide of disconcerting ease and smoothness, with high-flying performance. Effortlessly, you will be able to reconnect the waves and swell trains endlessly.

Discover a new world of sensations with our HA 1190 S and HA 1190 L, and how to choose the right high-aspect profile below. Our S Foils are supplied in their protective and carrying case .

Caractéristiques techniques des ailes et planches de foil Sroka

L’article S-Foil High Aspect 1190 front fender est apparu en premier sur SROKA Company.

SROKA S-Foil Adjustment Shims

This set of shims produced in G10 allows you to vary the angle of the S-Foil stabilizer. This angle variation increases the range of use of the S-Foil. These adjustment shims of the SROKA S-Foil are placed between the fuselage and the stabilizer. If you’re using the recommended stabilizers, you won’t need adjustment shims unless you’re looking to customize and fine-tune your stabilizer to be more balanced or go faster.

We offer you a small box with 8 wedges with different angles .

• + and – 0.25°
• + and – 0.5°
• + and – 1°
• + and – 2°

This makes it possible to adjust from +3.75° to -3.75° with an accuracy every 0.25°

L’article SROKA G10 S-Foil Adjustment Shims est apparu en premier sur SROKA Company.

Four-fin pack for the Skyrider 7’8

L’article 115mm Skyrider 7’8 x4 fins est apparu en premier sur SROKA Company.

Sroka 2024 Fast Flyer 4’6 + S-Foil + Wing Wingfoil Pack (Sroka Wing V4) 5m

You are an experienced Wing rider, and you want to put all the sensations that the sport can bring within your reach. You want to jump, perform, draw uncompromising curves in your surfs and send your best freestyle tricks on the flat. The 4’6 Fast Flyer Performance Wingfoil Pack is made for you.

Careful; This pack requires you to master the use of the waterstart in wing foil.

Find the right Wing Foil pack for you

https://srokacompany.com/caracteristiques-techniques-des-ailes-de-foil-sroka/

L’article Pack Wingfoil performance 4’6 Fast Flyer est apparu en premier sur SROKA Company.

Complete Surf Foil Pack “Fast Flyer” and “S-Foil”

This surf foil pack combines the versatility of the S-Foil and the perfect balance of the shape of the brand new Fast Flyer to give you the best possible level of performance. This ready-to-ride set will perfectly suit riders wishing to evolve towards a more efficient practice of foiling and will accompany the foiler throughout its progression. The “Fast Flyer” pack is not just a simple surf foil pack. It is also a multi-support pack that will allow you to practice wing foil, kite foil or wake foil in addition to surf foil.

Made in Brittany, this board is made of Full Sandwich fiberglass construction. This lightweight and above all hyper-resistant construction makes the Fast Flyer a very durable board. As proof, our old models such as the 152, from the same workshop, are still on the water… 7 years later.

L’article Surf Foil Pack: Fast Flyer 4’6 + S Foil est apparu en premier sur SROKA Company.

L’article SROKA M6x35 top matt screws for 160×52 board est apparu en premier sur SROKA Company.

Hip Leash for Wing Foil, Sup Foil and Downwind

The Foil Hip Leash is perfect for all the following disciplines: Downwind, Wing Foil, Sup race and Sup foil

The SROKA Hip Leash is designed to reduce drag Leash in the water and have your feet free to move around without getting your feet tangled. You can also use it as a wingfoil to stay in contact with the kite and so on. Free the hands and be more comfortable in the movements of the wing. It is particularly suitable for the entire Sky rider, Sroka Air and Fast Flyer range.

Diameter: 92 to 112cm.

L’article Hip Leash for Wingfoil – Belt Leash est apparu en premier sur SROKA Company.

Screw set for S-Foil 2020

This set of screws allows you to change all the screws of your S-Foil model 2020. All screws are made of A4 stainless steel with an M6 diameter. This is made up of 6 screws for the mast and 4 screws to attach the fins to the fuselage.

Complete set of screws for the S-Foil SROKA foil

• 3 A4 stainless steel screws with M6 x 35 mm hexagonal countersunk head to attach the mast to the plate
• 3 A4 stainless steel screws with M6 x 35 mm hexagonal countersunk head to attach the mast to the fuselage
• 2 A4 stainless steel screws with M6 x 25mm hexagonal countersunk head: fixing the front wing to the foil fuselage.
• 2 A4 stainless steel screws with M6 x 25mm hexagonal countersunk head: fixing the stabilizer on the fuselage of the foil.

Allen Head (Hex

L’article Screws for S-Foil model 2020 (M6) est apparu en premier sur SROKA Company.

Sky Rider Foil Board (5’5 – 5’8 – 6’3) – 8 YEARS OF FRENCH PRODUCTION

Our range of Sky Rider wing foil boards adapts to all your needs. Each of them will prove to be a model of performance, but also of versatility, allowing you to move from one foil discipline to another. For 8 years we have proudly produced them in France near our home in Brittany. These boards are the only ones on the market to benefit from a full sandwich deck and hull construction, and not a simple bamboo.

ALL TECHNICAL CHARACTERISTICS AND DIMENSIONS OF SROKA BOARDS AND FOILS Want to know how to get started in Wing foiling? We also guide you in choosing your Sroka wing foil package. A SROKA board cover worth € 99 is offered to you for the purchase of a Sky Rider made in France.

L’article Sky Rider Sroka Wing Foil Board 5’5 – 5’8 – 6’3 est apparu en premier sur SROKA Company.

Complete Pack Sky Rider Wing Foil 5’5, 5’8 or 6’3 – S-Foil 1750 – Wing Sroka V4 5m

Pack in stock rutpure.

Sroka offers you a Wing Foil pack combining high performance, Made in France quality and accessibility. Our Sky Rider board model is our pride with its 100% Breton construction. It showcases both our local industry and our unique know-how, in addition to offering unique flying sensations.

Our S-Foil and its Classic 1750 front wing complete the pack with the Wing Sroka V4 in 5m . If you have any questions, a more comprehensive article on the subject has been written to help you choose the right wing pack.

FOR ALL THE FEATURES OF SROKA BOARDS AND FOILS, CLICK ON THIS LINK.

L’article Sky Rider Complete Wing Foil Pack – S-foil 1750 – Wing V4 5m est apparu en premier sur SROKA Company.

S-Foil mast 70cm, 80cm or 90cm to complete your SROKA S Foil hydrofoil. They guarantee excellent rigidity for maximum performance.

SROKA masts are produced with high-quality T6061 T6 aluminum, which is used in the marine and aeronautical industry and is particularly suitable for the marine environment. They fit on the fuselage of the 2019/2020 S-Foil and the aluminum Kite Foil only.

Why choose SROKA foils?

L’article S-Foil Mast 2020 70cm-90cm est apparu en premier sur SROKA Company.

This set consists of four squares and four screws suitable for screws on double US Box type case to install a hydrofoil a board. These elements are made of stainless steel for better resistance to water, sand and salt. The screwdriving system requires a 4mm wool wrench but no screwdriver for ease of use. These 6mm squares and screws are standard to suit any US Box type case and any type of hydrofoil in classic platinum mounting.

L’article Square & Screw for Double Hydrofoil US Box (x4) est apparu en premier sur SROKA Company.

Pack Kite Foil and kite board

The ideal and hyper accessible kite foil pack with the aluminum K-Foil and the hybrid kite/surf foil board 160×52 by SROKA Company. Our aluminium K-foil is scalable over time, all parts are modifiable and interchangeable. And in 2021, for the launch of our new K950 fin set and its stabilizer, we are offering a pack with two sets of fins, a board and the complete aluminum K Foil . You can change the size of the fin to suit your program, for maximum versatility. No more frustration, our two sets of fins will cover all needs in all situations. It is one of the strongest kite foils on the market, the K-Foil has also been recognized by The Kite Mag magazine as THE freeride foil of the year 2019! Finally, if you want to learn to surf in foil, this board is the perfect compromise when you change your foil to go surfing by paddling.

L’article K-Foil aluminium kite foil pack + Two sets of fins + 160 x 52 board est apparu en premier sur SROKA Company.

Start and progress with ease thanks to the S-Foil Sroka!

Fly easily over the waves , take a gentle turn and discover the unique pleasure of foiling from your first flight. With the S-Foil Sroka, beginners can look forward to a successful and rewarding wingfoil experience and experienced skiers can enjoy themselves in the very light wind. Specifically designed to help you progress quickly and without holding you back, the S-Foil has been carefully redesigned to improve performance, stiffness and lightness. It offers total modularity with interchangeable parts to adapt perfectly to your level and your evolution.

The advantages of the S-Foil Sroka:

• Classic 1500, 1750 or 2000 front winglets, specially designed to facilitate take-off and stability according to your size.
• A standard version of the Classic foil with a 68cm fuselage and a versatile 300 stabilizer for easy handling.
• 80cm mast included, ideal for beginners, but with different size options to accompany you in your progress.

In addition to offering ease of learning, the S-Foil is built for durability and strength, with high-quality materials. High-end pre-preg carbon fins and T6061 T6 aluminum parts, used in the aerospace and marine industry, ensure strong and long-lasting performance. Choosing the S-Foil Sroka means opting for a foil that will follow you in your evolution, allowing you to progress without constraints. A super light wind foil that will remain an ideal partner even after gaining experience.

Versatile Standard Configuration:

• Ideal for beginners who want to discover and practice various foiling disciplines: Wing Foil, SUP foil, Wake Foil, etc.
• Comes with a practical carrying case and its complete screws for ease of use.

L’article Sroka Classic S-Foil est apparu en premier sur SROKA Company.

Wind Foil

L’article W-Foil – Wind Foil Freeride Performance est apparu en premier sur SROKA Company.

This SROKA 5 liter paddle dry bag is ideal for storing your non-waterproof personal belongings during your rides. Thanks to its shoulder strap, you can carry it on your person or slip it into the nets of your stand up paddle board.

L’article Paddle Waterproof Bag est apparu en premier sur SROKA Company.

ASSEMBLED SURF/SUP/WAKE FOIL PROTECTIVE BAG

This aluminum protective bag is a perfect carry bag to carry and protect your assembled or semi-assembled foil without the need to disassemble it. By using this carry bag, you protect the stabilizer, fuselage and front wing from scratches and small bumps that can occur during daily use. Perfect for carrying it in your car before or after your surf foiling session. Your surf foil, SUP foil or wake foil can be transported with or without a mast.

Compatible with:

1750 Classic – 1500 Classic – 1250 Classic – HA 1190 L & S – W-Foil

To see which kites are compatible with the cover, find the dimensions of our foils here.

L’article Protective cover for Surf foil, SUP foil and Wake foil assembled est apparu en premier sur SROKA Company.

This protective cover for S Foil, Wind foil and Kite foil is the perfect carry bag to transport and protect your foils. It offers different compartments and reinforced storage areas for the mast, wing, fuselage and for the aft stab, once the foil has been disassembled. Thanks to its foam reinforcement, your foils will be protected from the small shocks of daily transport. Neoprene wearing cuff for more comfort, large plastic zip to protect against oxidation. Length: 107 cm Outer foam: 7mm Inner foam: 5mm Weight: 500 grams

L’article Protective cover for foils est apparu en premier sur SROKA Company.

FOOT STRAPS FOIL SROKA

The SROKA Foil Foot Straps have been created to give you maximum support and comfort when sailing in any sport. Adjust the foot correctly in the Foot Straps and you will become one with your board. You’ll feel every movement of your board with maximum control.

• Set of Footstraps (number of your choice) for the following sports: Kitefoil, Kite Surfing, WingFoil, Windfoil, Sup Foil, Surf Foil, WakeFoil
• Standard dimensions fit all boards
• Triple-density foam construction for comfort with neoprene to provide maximum comfort in contact with the foot
• Adjustable bindings with 3 positions in length and 3 in width on each end of the straps (9 holes)
• Lightweight, comfortable and durable

L’article Foot Straps for WingFoil / Kitesurf / Surf Foil / Windfoil est apparu en premier sur SROKA Company.

K-FOIL ALUMINIUM FREERIDE

The Kitefoil Aluminium allows you to sail in really low wind conditions and push your limits in strong winds. It can go up to 4 times the wind speed.

The K-foil was developed by Bruno SROKA 3 x Kitesurfing World Champion. Bruno is always committed to developing a very high quality product at an affordable price. This foil has become a reference in Freeride kitefoils due to its construction quality, rigidity and ease of use.

Technology

The mast and fuselage are constructed of 6061 Aluminum, the best aluminum for marine use. All aluminium parts have been coated with a very dense anodization (beyond 60 microns) unlike many competitors who use a light anodization (10 microns, which implies a lower durability over time)

This K-foil Alu is made up of G10 fins. Each profile is machined to a precision of a tenth of a micron, ensuring an exactly identical fin profile to our plans and thus guarantee a perfect profile.

As an option for their launch, we offer you a pack with two sets of fins. This pack includes the complete aluminium K-Foil, its G10 fin set, with the addition of the K950 Freewave carbon fin set and its stabilizer, to sail in all possible conditions.

To see the details of your wings and the values, click on this link.

L’article K-Foil Aluminium – Kitefoil est apparu en premier sur SROKA Company.

10′ Leash for SUP and Wingfoil

We offer a range of leash coils (telephone) with different colours (Black, White, Red, Blue and Green). We have particularly taken care of the quality of the leash with a diameter of 8mm and a beautiful finish. This 10′ SUP Leash has been successfully tested in all types of conditions by Bruno SROKA in Brittany. The leash should be positioned on the back foot at ankle level for optimal use.

Compatible with Stand up Paddle and Foil practice. Discover our whole universe of Foil, tutorials and inflatable SUP by clicking on the links!

L’article Leash Coil 10′ est apparu en premier sur SROKA Company.

The Carbon Mast has been designed to provide maximum rigidity with minimal drag. It was built in 100% carbon. There is no foam inside the mast which guarantees a mast with the minimum of bending and twist but above all it guarantees the maximum reliability. 100% carbon matt, probox case. It comes in two sizes: 95 cm and 75 cm.

L’article Kitefoil mat, 95 or 75cm, 100% carbon est apparu en premier sur SROKA Company.

Foil Kite and board pack

Have you dreamed of a full carbon kite foil pack with your board at the price of an aluminium foil? We have designed it for you, with passion. Our K-foil is scalable over time, all parts are modifiable and interchangeable. Thanks to this modularity, this year we offer you the package with our new K950 fins and its stabilizer in addition to the existing 530 fin. Your pack contains two sets of fins for the price of one. The mast and fins are 100% carbon, which maximizes stiffness, reliability and performance. This makes it one of the strongest kite foils on the market. This pack includes the 160×52, dedicated to kite foiling. Versatile, this board also allows you to learn foil surfing. All you have to do is change the foil to go paddling in foil.

L’article Kitefoil Carbon fin pack 2021 and 160×52 board est apparu en premier sur SROKA Company.

L’article Tef Gel est apparu en premier sur SROKA Company.

We are proud to present the KiteFoil v3

Kitefoil

The Kitefoil develops enormously and allows you to fly over the water effortlessly and in low winds. The best ones reach 4x the wind speed.

The K-foil was developed by Bruno SROKA 3 x Kitesurfing World Champion. He is always committed to developing a very high quality product at an affordable price. This foil has become a reference in the Freeride kitefoil world due to its construction quality, rigidity and ease of use.

The K-foil is a high-performance, easy and accessible kitefoil … but above all scalable. We can evolve the foil according to what you want. All you have to do is change the fins or the length of the mast. You can also change the board because we have adapters to transform the fastening system. In short, we have the best value for money on the market. There is no doubt that you will fall under the spell of this Kitefoil.

L’article K-Foil – Carbon Kite Foil est apparu en premier sur SROKA Company.