Discover the S Foil Alu in UHA

Soaring like a bird, skimming the crest of the waves at full speed as you effortlessly descend the swell trains, becomes a reality with our UHA (Ultra High Aspect Ratio) range. This range, with a large wingspan, allows you to foil almost without wind and swell. Use all the energy available in the little swell to maintain the foil and fly on swell trains.

Our aluminum S Foil is designed to provide exceptional strength and durability while remaining lightweight and maneuverable. The aluminum mast provides increased rigidity and a strong connection, ensuring optimal stability even in difficult conditions. If you are looking for a kite to go fast in downwind or to downwind in wing, UHA kites have been created for you and they will surprise you with their ease and performance.

UHA Wing Range

This range consists of 5 sizes of kites:

• 700 HAU (700 cm²)
• 800 UHA (800 cm²)
• 930 UHA (930 cm²)
• 1100 UHA (1100 cm²)
• 1260 UHA (1260 cm²)

Key features

• Performance : Using the same profile technology as our HA Speed range, our UHA wings offer exceptional smoothness on take-off and impressive speed performance.
• Versatility : Perfectly suited to the LW and DW board ranges as well as the Superfly.
• Ease of Use : Designed for quick handling and increased maneuverability, these kites are ideal for all levels of riders.
• Durability : The aluminum pole ensures long-term durability and superior wear resistance.

Speed, Glide and Maneuverability

It’s impossible to be disappointed with this UHA range. Speed, glide and handling are the three words that best characterize it. With our aluminum S Foil and UHA wings, every session becomes an unforgettable experience, whether you’re an ambitious beginner or an expert looking for new sensations.

Adjustment wedge supplied with this range.

L’article S-foil UHA 700 – 1260 est apparu en premier sur SROKA Company.

In stock

The 800 UHA is the most radical weapon for breaking records. It represents the ultimate kite for downwinding or for those who want to go fast, turn quickly, climb quickly and descend at full speed on limitless swell trains. The only limit is you and your ability to push back what was not yet acceptable to you. Nevertheless, this range remains very accessible. Soaring like a bird, skimming the crest of the waves at full speed as you effortlessly descend the swell trains, becomes a reality with our UHA (Ultra High Aspect Ratio) range. This range, with a large wingspan, allows you to foil almost without wind and without swell, using all the energy needed in the swell to foil. If you are looking for a kite to go fast in downwind or to downwind in wing, UHA kites have been created for you and they will surprise you with their ease and performance. This range consists of 4 wing sizes: 800 UHA (800 cm²), 930 UHA (930 cm²), 1100 UHA (1100 cm²) and 1260 UHA (1260 cm²). It is perfectly suited to the LW and DW board ranges as well as the Superfly. Building on the success of the HA Speed range, we decided to apply the same profile in order to bring the same smoothness to take-off, but with impressive speed performance. It’s impossible to be disappointed with this UHA range: speed, glide and handling are the three words that best characterize it

L’article 800 HAU est apparu en premier sur SROKA Company.

L’article Elite Board Cover est apparu en premier sur SROKA Company.

L’article Elite Carbon Foil 14mm | 85cm est apparu en premier sur SROKA Company.

L’article Solo Carbon Foil 16mm | 85cm est apparu en premier sur SROKA Company.

L’article Elite Carbon Mast 14 mm | 85 cm + fuselage est apparu en premier sur SROKA Company.

Flex Management: A new process to optimize pumping performance.

Through extensive testing and months of research and development, we have applied different methods, such as the careful choice of materials, the strategic organization of the carbon layers, the targeted distribution of reinforcements and a precise design of the profile to manage the flex of the front wing, thus offering an identical profile to the 1190 Speed, but with slightly more flexibility for improved pumping performance.

It’s a perfect balance to make the most of small and medium waves, while preserving your endurance between waves and keeping a high speed when pumping.

3x M8 16mm fuselage/front wing fixing screws supplied.

Full foil here.

L’article S-foil High Aspect 1190 Waves front wing est apparu en premier sur SROKA Company.

With the Superfly 4’2 to 5’0 board, experience the pinnacle of the wing foil and surf foil experience, where every aspect of this board is designed to give you unparalleled benefits in terms of performance, comfort, control and durability. A perfect board for anyone who wants to do Surf Foil and Wingfoil. It is part of the Elite Range. The perfect combo with the Elite or Solo carbon foil .

L’article Superfly 4’2 – 5’3 – Elite Range est apparu en premier sur SROKA Company.

How will the front wing 1250 Control transform your wingfoil experience in freeride and waves?

The 1250 Control is as versatile for freeride wing foil as it is for waves. Its medium aspect ratio allows you to take fluid turns and surf the waves without being left behind. Its profile optimizes lift at low speeds to take off quickly and gradually.

The curved shape of the fin helps you keep the tips in the water during turns and prevent falls. In addition, the fin emits water noises when it brushes the surface, which warns you before you lose control.

The S-foil is the foil that will also transform your wingfoil practice on the waves. It is a foil that has been designed to meet the needs and desires of riders who want to have fun in the waves, whether in wing foil, surf foil or wake foil, while eliminating the imperfections of support, drag and precision of other foils on the market.

Wing alone here.

L’article S-foil Control 1250 est apparu en premier sur SROKA Company.

The 950 Control: Freeride and wing foil surfing at its peak

With the Foil 950 Control, the freeride experience in wing foil takes on a new dimension. Glide with unparalleled ease, master your turns with absolute precision. Designed for exceptional maneuverability, smoothness, and precision.

The Foil 950 Control is your all-rounder when it comes to exploring the joys of freeride wing foil. Its medium ratio offers a smooth curve and optimal speed, both on open water and waves. Its profile provides lift at low speeds, facilitating gradual and fast take-offs. Thanks to its curved design, you maintain optimal control in corners while avoiding imbalances.

The gentle murmur of the water as it approaches subtly warns you, preventing you from stalling.

This new 950 foil fin ensures optimal stability in the waves, as it does not stall, does not ventilate and has been optimized to eliminate that impression that the foil wants to get out of the water at high speed. The foil remains submerged and does not throw you off balance. So you can enjoy your wingfoil session to the fullest!

Wing alone here.

L’article S-foil Control 950 est apparu en premier sur SROKA Company.

L’article S-Foil High Aspect 1190 Wave est apparu en premier sur SROKA Company.

S-Foil HA 1350 Lift

The High Aspect 1350 Lift foil front wing will make you glide endlessly downwind and reconnect small swell trains with disconcerting ease in surf foil, wake foil or wingfoil in all conditions. This wing will make you rediscover your usual spots. Choppy bodies of water that were previously unusable will be your new playground.

Very easy to take off, the HA 1350 L no longer descends once in flight. A simple pumping stroke, an inconsistent swell train or a little breeze is enough to prolong the pleasure of gliding indefinitely. Everything has been done to offer you a magical, infinite glide, with a minimum of effort.

The HA 1350 Lift is also ideal for navigating lakes, where it passes sluggishness super well while flying for a long time. You will be able to take advantage of the slightest breeze and the slightest ripple to fly away and glide effortlessly.

The HA 1350 front wing is compatible with all S-Foil fuselages and stabilizers. The foil comes with screws and a custom-made transport/protection case.

The front wing alone is available here for €499.90

L’article S-Foil High Aspect 1350 Lift est apparu en premier sur SROKA Company.

Retail screws for the Foil Sroka 2021 range

All the hardware to equip your 2021 S-Foil. Here are the different lots available:

• 4 M8x20 screws and their nipples for the S-Foil 2021/Air Inflatable Board attachment
• 4 M8x25 screws and their nipples for the S-Foil 2021 frame/Sky Rider and Fast Flyer hard board attachment
• 4 M8x30 screws to attach the fuselage and plate to the mast
• 3 M8x25 screws for attaching the Classic front wings to the fuselage
• 3 x M8x16 screws for attaching the High Aspect front wings to the fuselage
• 2 M8x25 screws to attach the stabilizers to the fuselage (this length allows for the installation of adjustment shims)
• M8 Torx Wrench

L’article Retail Hardware est apparu en premier sur SROKA Company.

Complete screws for the S-Foil Sroka 2021

This complete screw kit includes:

• A Torx wrench with an M8 diameter
• 4 M8x30 screws for the mast of the S-Foil 2021
• Three M8 screws for the front fender (please choose your fender type from the product options)
• 4 M8 screws and their nipples for the turntable/board attachment (please choose your board model from the product options)
• A tube of Gel
• Optionally, a set of adjustment shims to adjust the angle of incidence of your stabilizer (three shims of 0.5° – 1° and 2°)

We recommend disassembling and rinsing the foil with fresh water after each session, as well as avoiding getting sand on the Tef Gel and in the threads. If you don’t disassemble your foil, its elements can remain welded together by corrosion.

These screws are compatible with the 2021 S-Foil and not the 2020 S-Foil (which uses M6 screws). Find the screws for your S-Foil 2021 on this page.

L’article Complete screws for S-Foil and Sroka boards est apparu en premier sur SROKA Company.

Mast for S-Foil 2021

The mast for S-Foil 2021 is stiffer and lighter than its predecessor. Its shortened rope will make you more maneuverable for more intense jibes and turns than ever. Its T6061 T6 aluminum construction guarantees unfailing strength and rigidity. It adapts to all foil sports. Thanks to its three available sizes (70, 80 and 90cm), it allows you to adapt your sailing style according to your desires and needs. All our 2021 S-Foil parts are compatible and interchangeable, so you can build the foil of your dreams yourself or adapt to your body of water.

Find here the High Aspect (speed and pumping) and Classic (freeride and carving) fins, the fuselage and the frame for the S-Foil 2021. Please note that this mast is not compatible with the 2020 S-Foil. Find out how to choose the right mast for your Foil Sroka below!

L’article S-Foil Mast est apparu en premier sur SROKA Company.

Fuselage for S-Foil

The Fuselage for S-Foil 2021+ is now available in several lengths. The goal is to allow you to have a fully modular and scalable foil, capable of adapting to your needs. By default, all our S-Foils are sold in a standard configuration. For those who want more maneuverability, the Short and Ultra Short fuselage will allow you to make sharp turns in the waves and radical maneuvers. They are also less stable longitudinally and require a higher pumping frequency. Short fuselages are therefore intended for two who have an intermediate or advanced technical level. The standard, short and ultra-short fuselages allow you to practice all foil disciplines apart from Windfoil, which has its dedicated 93cm fuselage (coming on this page).

Our fuselages are experiencing a significant increase in rigidity this year. Their connection makes it easier to assemble and disassemble your S-Foil, in addition to making all 2021+ fins compatible and interchangeable on the same foil. Their composition is made of T6061 T6 aluminum, used for the aeronautical industry, giving them rigidity and durability.

L’article Fuselage S-Foil est apparu en premier sur SROKA Company.

Classic S-Foil Front Fins

Our Classic fins complete the High Aspect range. Whether you are looking for an introduction to Wing Foil or to surpass yourself and move up a gear in Surf Foil, there is a Sroka fin for you. For beginners or riders looking for lift and stability, the 1750 (XL) and 2000 (XXL) fins will be perfect. The 1500 (L) will seduce with its versatility by opening up a variety of practices, from SUP Foil to Wake Foil and Wingfoil.

All our fins are scalable products. For example, while a beginner will be satisfied with the lift and stability of the 1750, an experienced rider looking for maximum lift in light wind will be able to reveal its full potential. Our goal is for every element of your quiver to be durable, not only because of its quality but also because of its performance. All our profiles have been carefully designed, designed and tested to make you feel the maximum feeling of freedom that the foil provides.

Please note that these front wings are not compatible with the 2020 model S-Foil, except with the 2020 mast/front wing adapter fuselage.

Their detailed features are on this link. To choose the right kite for you, keep reading.

L’article Classic S-Foil Front Fins est apparu en premier sur SROKA Company.

Choose Your High Aspect Wing

To enrich our range of foil front wings, we are adding the High Aspect range to the
classic S Foil
. Where the mid-aspect ratio of the Classic offers carving and versatility, here we have designed front fins with uncompromising glide and pumping. Each High Aspect has a unique profile, which we designed by collecting feedback from our customers to build the ultimate gliding weapon:

• The
  HA 1190 S (speed)
  is perfect for
  wing foiling
  . It will also be excellent for those who want to surf powerful swell trains, but also in other foil disciplines such as Wind Foil and Kite Foil. It provides sensations of speed, glide and absolute control that will change your vision of the foil. It also delivers a superb pumping. This profile is faster, but less buoyant than the Lift. Thanks to its size and profile, your experience will never be punishing, and you will remain in control no matter the situation.
• 
  The HA 1190 L (Lift)
  is here to satisfy your surfing desires. It will fully reveal itself in
  Surf Foil
  , SUP foil, and
  Wake Foil.
  This wing benefits from a profile with almost 20% more lift compared to the Speed. It generates a pumping and glide of disconcerting ease and smoothness, with high-flying performance. Effortlessly, you will be able to reconnect the waves and swell trains endlessly.

Discover a new world of sensations with our HA 1190 S and HA 1190 L, and how to choose the right high-aspect profile below. Our S Foils are supplied in their protective and carrying case .

Caractéristiques techniques des ailes et planches de foil Sroka

L’article S-Foil High Aspect 1190 front fender est apparu en premier sur SROKA Company.

SROKA S-Foil Adjustment Shims

This set of shims produced in G10 allows you to vary the angle of the S-Foil stabilizer. This angle variation increases the range of use of the S-Foil. These adjustment shims of the SROKA S-Foil are placed between the fuselage and the stabilizer. If you’re using the recommended stabilizers, you won’t need adjustment shims unless you’re looking to customize and fine-tune your stabilizer to be more balanced or go faster.

We offer you a small box with 8 wedges with different angles .

• + and – 0.25°
• + and – 0.5°
• + and – 1°
• + and – 2°

This makes it possible to adjust from +3.75° to -3.75° with an accuracy every 0.25°

L’article SROKA G10 S-Foil Adjustment Shims est apparu en premier sur SROKA Company.

Complete Surf Foil Pack “Fast Flyer” and “S-Foil”

This surf foil pack combines the versatility of the S-Foil and the perfect balance of the shape of the brand new Fast Flyer to give you the best possible level of performance. This ready-to-ride set will perfectly suit riders wishing to evolve towards a more efficient practice of foiling and will accompany the foiler throughout its progression. The “Fast Flyer” pack is not just a simple surf foil pack. It is also a multi-support pack that will allow you to practice wing foil, kite foil or wake foil in addition to surf foil.

Made in Brittany, this board is made of Full Sandwich fiberglass construction. This lightweight and above all hyper-resistant construction makes the Fast Flyer a very durable board. As proof, our old models such as the 152, from the same workshop, are still on the water… 7 years later.

L’article Surf Foil Pack: Fast Flyer 4’6 + S Foil est apparu en premier sur SROKA Company.

Screw set for S-Foil 2020

This set of screws allows you to change all the screws of your S-Foil model 2020. All screws are made of A4 stainless steel with an M6 diameter. This is made up of 6 screws for the mast and 4 screws to attach the fins to the fuselage.

Complete set of screws for the S-Foil SROKA foil

• 3 A4 stainless steel screws with M6 x 35 mm hexagonal countersunk head to attach the mast to the plate
• 3 A4 stainless steel screws with M6 x 35 mm hexagonal countersunk head to attach the mast to the fuselage
• 2 A4 stainless steel screws with M6 x 25mm hexagonal countersunk head: fixing the front wing to the foil fuselage.
• 2 A4 stainless steel screws with M6 x 25mm hexagonal countersunk head: fixing the stabilizer on the fuselage of the foil.

Allen Head (Hex

L’article Screws for S-Foil model 2020 (M6) est apparu en premier sur SROKA Company.

The Fast Flyer 4’6: the epitome of versatility and performance

We always start from your needs to design our products. If you want to be able to go from Wing Foil at a good level to surf foil and kitefoil with a single board, but also have something to have fun in dockstart and wake foil, the Fast Flyer 4’6 will accompany you everywhere. This board of 4’6 (142cm) long by 21″ 1/2 (55cm) wide for a volume of 38 L will fully satisfy all surfers wishing to learn or take their foil to the next level. Its extreme versatility does not sacrifice the quality of its shape, construction or performance in the different disciplines it allows you to explore. The Fast Flyer 4’6 benefits from an exceptional and unique know-how. From its design by shaper J.B. Marchand to its construction in our Morbihan factory and its test phase on our coasts, your board is 100% French and Breton.

If you still have doubts about which foil board you need, we have prepared an article on this topic. The Fast Flyer 4’6 is also available as a complete wing foil pack on our website ! The community will also be happy to discuss it on the Sroka Session group, do not hesitate to share your most beautiful moments in the group.

Weight: 4.7kg

https://srokacompany.com/caracteristiques-techniques-des-ailes-de-foil-sroka/

L’article Surf Foil 4’6 Fast Flyer est apparu en premier sur SROKA Company.

This set consists of four squares and four screws suitable for screws on double US Box type case to install a hydrofoil a board. These elements are made of stainless steel for better resistance to water, sand and salt. The screwdriving system requires a 4mm wool wrench but no screwdriver for ease of use. These 6mm squares and screws are standard to suit any US Box type case and any type of hydrofoil in classic platinum mounting.

L’article Square & Screw for Double Hydrofoil US Box (x4) est apparu en premier sur SROKA Company.

This protective cover for S Foil, Wind foil and Kite foil is the perfect carry bag to transport and protect your foils. It offers different compartments and reinforced storage areas for the mast, wing, fuselage and for the aft stab, once the foil has been disassembled. Thanks to its foam reinforcement, your foils will be protected from the small shocks of daily transport. Neoprene wearing cuff for more comfort, large plastic zip to protect against oxidation. Length: 107 cm Outer foam: 7mm Inner foam: 5mm Weight: 500 grams

L’article Protective cover for foils est apparu en premier sur SROKA Company.

FOOT STRAPS FOIL SROKA

The SROKA Foil Foot Straps have been created to give you maximum support and comfort when sailing in any sport. Adjust the foot correctly in the Foot Straps and you will become one with your board. You’ll feel every movement of your board with maximum control.

• Set of Footstraps (number of your choice) for the following sports: Kitefoil, Kite Surfing, WingFoil, Windfoil, Sup Foil, Surf Foil, WakeFoil
• Standard dimensions fit all boards
• Triple-density foam construction for comfort with neoprene to provide maximum comfort in contact with the foot
• Adjustable bindings with 3 positions in length and 3 in width on each end of the straps (9 holes)
• Lightweight, comfortable and durable

L’article Foot Straps for WingFoil / Kitesurf / Surf Foil / Windfoil est apparu en premier sur SROKA Company.

10′ Leash for SUP and Wingfoil

We offer a range of leash coils (telephone) with different colours (Black, White, Red, Blue and Green). We have particularly taken care of the quality of the leash with a diameter of 8mm and a beautiful finish. This 10′ SUP Leash has been successfully tested in all types of conditions by Bruno SROKA in Brittany. The leash should be positioned on the back foot at ankle level for optimal use.

Compatible with Stand up Paddle and Foil practice. Discover our whole universe of Foil, tutorials and inflatable SUP by clicking on the links!

L’article Leash Coil 10′ est apparu en premier sur SROKA Company.

L’article Tef Gel est apparu en premier sur SROKA Company.